Tradition. Innovation. Performance. Worldwide.

We're on call 


Operating Hours

Mon - Fri 7:30am - 4:00pm

Write To Us

Used 2018 Kenworth T880 with PM 100

Used 2018 Kenworth T880 with PM 100

The range of BIK Series cranes covers all load handling needs, whatever the tonnage. Offering  a vast assortment of applications, BIK Series cranes can be used in a variety of sectors. All BIK Series cranes are built to high quality standards, in accordance with safety standards and the latest technological innovations, we offer the market models that will maintain their value over time.

Call Now!

41 Claireville Drive, Toronto, Ontario M9W 5Z7
Located just 5 minutes north of Toronto International Airport of HWY 427 and Finch Ave. Free airport pick-up for all our guests.

See Location Details

Boom Details

PM 100028-SP  Knuckle Boom  Folding Hyd 8 ext Knuckle Boom  – 65’ Horizontal Reach  (77’ vertical)

  • Horizontal Capacity:
    • 36,800 lb @  16’
    • 20,100 lb @  27’
    • 16,000 lb @  33’
    • 13,000 lb @ 39’
    • 9,300 lb @  52’
    • 6,000 lb @ 65’
  • PM Power-Link connections at Main, Knuckle & Jib Cylinders, Dual Planetary Gear Motors & Continuous Boom Rotation
  • 180-degree flip-up Hydraulic Extra Wide Main outriggers at pedestal – 30’ – 7” span – 360-degree full load chart stability
  • Hydraulic Oil Cooler, high-pressure return filter and min. 80–gallon hyd oil tank with gate valves mounted at the front under deck
  • Scanreco Radio Remote Control includes: 2-batteries, in-cab charger, and backup cord – 5 level turtle (micro) slow-down mode
  • Simplified Hydraulic Overload System allowing maximized uptime and ease of maintenance
  • Manual Controls – Danfoss valve located on boom column with plastic cover and mechanical hour meter
  • Lifting Winch – 4-ton single-line pull winch that can be plumbed for up to 4 part line accessories
  • Crane Painted PM Blue – Certified Painting Quality System – Load Tested and certified
  • Installed at rear, with integral sub-frame, 3/8” front and centre -½” sheer plating at crane for maximized torsion strength

Also Included:

  • Auxiliary Extra-Wide hydraulic outriggers  23’ spread front mounted for 360 degree stability
  • 1” Drawplate Plate at rear w/pintle hook
  • 36” Alum locking checker plate toolbox installed
  • (8) PVC stabilizer pads – with holders (4 pcs).,

Deck Details

22’  x 102”  Steel Deck:

  • 66” head board with window cut out with mesh
  • Steel checker plate Floor
  • Winch bar and holder
  • Integral steel sub-frame and extension at rear as torque box for boom with all proper engineered sheer planting
  • X-braces & support
  • 2-Deck access Ladders,  reflectors, conspicuity tape, Mud-flaps
  • 6-Winches and tracks (sliding) under deck.

Truck Details

Used – 2018 Kenworth T880  T/A Steer – Tridrive  (5 Axles total):  99,000 lb GVWR

  • Paccar 13L Diesel – 505 hp w/Jake – 1,850 ft/lb torque
  • Eaton Ultrashift Plus Automated 18 spd trans, Truck cab white
  • (2) x 20,000 LB fronts with 425 / 65R22.5 tires
  • 69,000 LB Tridrive Rears on Hendrickson Primax Air Ride Susp. With 56” spread at t/a, Double Frame
  • Polished ALCOA Aluminum Wheels front and outer rear
  • Chrome single polished Exhaust, Chrome Grille &  Bumper
  • 120-gallon alum fuel tank
  • Loaded with Options Including:  A/C, Tilt/Telescopic steering, AM/FM stereo with Bluetooth, high back air driver’s seat, fixed passenger seat, cruise, heated mirrors,  exterior S/S sun visor, 6 wheel lock-ups, power windows and locks, Air ride cab, full differential locks, trailer air tow package, etc…

NOTE: Pictures of Shown when Unit was New

Ideal Heavy Lift Precast Unloader

CALL FOR DETAILS AT: 1-888-557-2244  OR  416-679-3838



About Nate23