A USED 2019 FREIGHTLINER M2-106 WITH BIK TC-70 GRAPPLESAW
 |
USED 2019 FREIGHTLINER M2-106 WITH BIK TC-70 GRAPPLESAW
BIK Boom Trucks has grown to service a wide range of customer base, whose industries include the Tree Service Industry, Block/Brick, Pre-Cast, Poured Wall, Building Erection, Crane Service, Oil Field Transportation, Drywall, and many more. After 3000 plus units successfully installed, BIK Boom Trucks has become synonymous with your “One stop shop for all your Boom Truck needs.”
Call Now!
416-679-3838
41 Claireville Drive, Toronto, Ontario M9W 5Z7
Located just 5 minutes north of Toronto International Airport of HWY 427 and Finch Ave. Free airport pick-up for all our guests.
Boom:
Pre-owned – BIK Tree-Care Series TC-78 (23.5 ton/ml Knuckle Boom by PM: 7-hydraulic extensions to 78’ vertical) w/extra grapple extn
- Vertical Reach of 70’
- Handles 3,800 lbs @ 70’ Vertical
- HORIZONTAL Capacities:
- 9,800 lb @ 14’
- 5,900 lb @ 20’
- 4,330 lb @ 26’
- 2,560 lb @ 40’
- 1,750 lb @ 55’
- 408 Degrees Rotation on Main Hydraulic Slewing
- Double pilot operated on slewing and pilot operated check valves on all cylinders, Hydraulic Oil Cooler, high pressure return filter and min. 40-gallon oil tank for boom
- DANFOSS Proportional Valve Controls – single sided operator control station, Load Holding Valves on all cylinders
- PM Power–Tronics electronic monitoring & load control with Stabilizer deployments sensors & didgital read-out on the remote
- SCANRECO Radio Remote Control
- Hydraulic OUT and Hydraulic DOWN Extra Wide – 21’ 6” span , 2-sided stabilizers w/ round foot pads welded to bottom of cylinder.
- 15 degree negative angle on folding arm – Hydraulic Overload Protection – simplified sysTem that prevents boom from overload
- Two functions plumbed to end of 6th extn, – Heavy Duty Pedestal Turning Cylinders for greater turning torque & reduced wear
- Installed at rear on integral sub base / torque box, Engineer certified stability inspection & certificate
Deck:
14′ 6″ x 102″ Steel Deck Body
- 60″ steel headboard
- Steel checker plate deck surface
- Main sil X-braces & support
- 2-Deck access Ladders at Headboard
- 2-Ladders at rear, reflectors and Mud-flaps
- 6 – Sliding Winches and track under deck
- Painted black
Truck:
2020 Freightliner M2-106 2- axle Truck – 33,000 lb GVWR
- 26,900 MILES | 1850 ENG. HOURS
- Hydraulic Brakes
- 280 hp
- Allison Auto Trans
- 12,000 lb fronts w/11 R22.5 tires
- 21,000 lb rears
- aluminum rims, Air Cond, 2-man pass seat, cruise, power windows/locks, tilt/tele steering, stereo, drawplate at rear of truck frame with electric brake actuator, white color cab, etc
Also Included:
- (4) pcs – 2″ PVC stabilizer pads -with holders
- (3) Aluminum storage boxes mounted under deck
- Pre-owned MECANIL SG-160-RC grapple saw with 45 degree slide-out jib & quick disconnect attachements
- draw plate with Reese style hitch receiver with electric brake actuator
